Technical Specifications of Vigor
2600Ge |
| Hardware
Interface |
LAN |
4-port
10/100 Base-TX Switch with port-based VLAN |
| WAN |
ADSL |
| WLAN |
IEEE
802.11g/11b |
| ADSL
Protocol |
PPP
Over AAL5 (RFC 2364) |
| PPP
Over Ethernet (RFC 2516) |
| PPPoE
Pass-Through for LAN |
| PPPoE
Pass-Through for WLAN |
| Bridge/Routed
Ethernet Over AAL5 (RFC 1483, 2684) |
| ADSL
Compliance |
G.DMT |
| G.Lite |
| T1.413
issue2 |
| Auto
mode Up to 8Mbps downstream |
| 1Mbps
upstream |
| NAT |
Multi-NAT |
| DMZ |
| Port
Redirection |
| Open
Ports |
| ALGs
(NetMeeting, MSN Messenger, ICQ, Quake, VPN pass-through, VoIP...etc.) |
| Virtual
Private Network |
IKE
Key Management |
| IPSec,
PPTP, L2TP, L2TP over IPSec |
| DES/3DES/AES
Encryption |
| MPPE
Encryption for PPTP |
| IPSec
Authentication (MD5 and SHA-1) |
| Remote
Access VPN |
| VPN
Pass Through |
| Up
to 2 tunnels (for dail-out only) |
| RADIUS
upport |
| Firewall
Features |
Access
Control |
| IP-based
Packet Filtering |
| Stateful
Packet Inspection |
| Denial
of Service Prevention |
| Routing
Support |
RIPV2 |
| Configurable
Static Route |
| Network
Features |
DHCP
Server/relay |
| Dynamic
DNS |
| Call
Scheduling |
| Management |
Web-based
user interface |
| Command
Line Interface (Telnet) |
| Telnet
Remote Access Support |
| SNMP
Agent with MIB-II |
| Built-in
Diagnostic Function |
| Quick
Start Wizard |
| Remote
Firmware Upgrade |
| Attack
Alert by E-mail |
| Secure
Remote management |
| Syslog
Monitoring |
| WLAN
Access Point |
Regulatory
approval |
EN60950/55022/301489-17/300328-2 |
| Security |
64/128-bit
WEP |
| 802.1x |
| VPN
over WLAN / SSID stealthing |
| Wi-Fi
Protected Access (WPA) |
| Access
Control |
MAC
address locking |
| Transmission
rate |
IEEE802.11g
and 11b backward compatibility |
| Max.
Power |
10
Watt |
| Dimension |
L22
* W16 * H3.67 (cm) |
| Prower |
AC
12V |
